|
|
|
|
|
Product Enquiry
|
|
Further information about the GCEM4100 can be found using the options
below |
|
|
|
|
|
|
|
|
|
The GCEM4100
is designed for difficult flue gas
applications and where low pollutant
levels are needed to be accurately
monitored. It is a hot extractive
analyzer and uses infrared absorption
spectroscopy to measure up to seven
gases in a single self-contained unit.
Most conventional extractive systems
require the sampled gas to be cleaned
and dried to a very high standard prior
to analysis which invariably results in
high maintenance costs. Such elaborate
pre-conditioning is not required by the
GCEM4100. Process gases are continuously
drawn through a fine filtered probe
installed in the flue gas and
transported to the measurement chamber
via a heated sample line - without
further conditioning. Designed for use
on gas turbines, the analyzer is MCERTS
certified. |
|
|
|
| |
Up to seven
gas species |
|
Analogue and
serial digital output |
| |
CO, CO2, NO,
NO2, SO2, HCl, CH4 & H2O |
|
Automatic
calibration verification facility |
| |
ppm, mg/m3
(measured) and mg/Nm3 (normalized) |
|
Over five years
data logging via PC software package |
| |
Real-time
normalization for STP and H2O |
|
Full zero
and span verification using audit gases |
| |
Full range
of outputs and alarms |
|
MCERTS certified
instrument -
Download Certificate |
|
|
|
|
GCEM4100 Flue Gas Analyzer |
|
|
|
|
Left image
is the analyser cabinet and right
image is the air condition enclosure. |
|
|
